Installing The Pylon Viewer - Basler Pioneer User Manual

2.2.4

Installing the pylon Viewer

Note
During installation of the Basler pylon Viewer, the current network adapter-
driver associations will be changed for all network drivers installed in your PC
with Basler drivers replacing the current drivers.
If you want to reestablish the original network adapter-driver association for a
compatible GigE adapter, see the "Changing the Driver Association for a
Compatible GigE Network Adapter" section.
If you want to unbind a Basler network driver from a from a non-compatible
GigE adapter or a Fast Ethernet adapter that is not used with a camera, see
the "Unbinding the Basler Filter Driver from a Non-compatible or a Fast
Ethernet Network Adapter" section.
1. Make sure your GigE camera is disconnected from your computer.
2. Insert the Basler pylon SDK Installation CD into your CD-ROM drive.
a. Click Start and click Run.
b. When the Run window opens, click the Browse button.
c. Navigate to your CD-ROM drive and find the file called Basler pylon Viewer x.x.x.xxx.exe.
d. Click on the Basler pylon Viewer x.x.x.xxx.exe file, click the Open button, and click the OK
button.
3. The program will prepare to install and then a Welcome window will open. Click the Next button.
4. A License Agreement window will open. Accept the agreement and click the Next button.
5. A Customer Information window will open. Enter the appropriate information and click the Next
button.
6. A Setup Type window will open. We recommend that you select Complete Installation and then
click the Next button.
(If you choose Custom Installation, the wizard will let you deselect the parts of the software that
you do not want to install and will let you specify an alternate installation directory.)
7. A Ready to Install the Program window will open.
Click the Install button.
Basler pioneer
Note
If applicable, close all applications needing network connection before
proceeding. Otherwise, the network connections for your applications will
temporarily be lost.
Software and Hardware Installation
27