Note
If you are using a compatible GigE network adapter, the installation of the
Basler pylon Software Development Kit or the Basler pylon Viewer will remove
the driver that is currently installed for the adapter and will install the Basler
performance driver.
If you are using a non-compatible GigE or a Fast Ethernet network adapter,
the installation of the Basler pylon Software Development Kit or the Basler
pylon Viewer will bind the Basler filter driver to the network adapter as a
service and will enable the service.
For more information about compatible chipsets, see Section 4.1 on
Basler pioneer
Software and Hardware Installation
page
53.
23