Physical Interface; General Description Of The Camera Connections - Basler DART BCON SERIES User Manual

AW00136902000

4 Physical Interface

4.1 General Description of the Camera
Connections
The camera is interfaced to external circuitry via a 28-pin flat flex cable (FFC) connector. The
connector allows camera integration into embedded systems with both FPGAs and SoCs (Systems
on a Chip).
The connector provides connections for LVDS image transfer, input and output signals, and power
supply. Furthermore, standardized I²C lines are integrated, which are used for camera configuration
via the Basler pylon Camera Software Suite.
There is also an LED indicator located on the back of the camera.
Figure 18 shows the location of the connector and the LED indicator.
Fig. 18: Camera Connector and LED Indicator
Basler dart BCON
LED indicator
FFC Connector
Physical Interface
23