Prerequisites; Step 1: Installing The Interface Card - Basler CXP-12 Quick Install Manual

Prerequisites


The host computer must have at least one PCIe 3.0 x4 slot available on
the main board.

When using Power over CoaXPress (PoCXP), make sure that the power
supply of your computer provides a female 6-pin PCIe power connector.
If none is available, get an appropriate adapter.

If you are not using PoCXP, you need an external power supply.

Make sure that you have a suitable lens and the required accessories to
hand.

Step 1: Installing the Interface Card

1. Make sure that the host computer is shut down and unplugged from the
power outlet.
2. Remove the cover of the computer.
3. Plug the interface card into a free PCIe 3.0 x4 slot of the computer.
4. If you want to power the camera via the interface card (PoCXP), the
interface card needs to be connected to the power supply of the
computer.
Plug the female power supply connector of the computer to the power
connector of the interface card (PCIe 6-pin). If your computer doesn't
provide a matching power supply connector, use an appropriate adapter.
HARDWARE INSTALLATION
EN
ZH
JA
7