Pf Encoder Sensor - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800

4.2.6.3 PF Encoder Sensor

1. Remove the L SIDE COVER ASSY.
When removing the SCALE, PF, be careful not to deform or
C A U T I O N
damage it. See Figure 4-89.
2. Remove the three screws that secure the PF ENC COVER B.
Three C.B.S. M3 x 8 screws
3. Release the three tabs that secure the PF ENC COVER B and remove it.
Figure 4-88.
When removing the PF Encoder Sensor, be careful not to bend the
C A U T I O N
capacitor on the sensor.
4. Remove the connector from the PF Encoder Sensor.
5. Remove the two screws that secure the PF Encoder Sensor and remove it.
Figure 4-89.
Two C.P.P. M2.6 x 6 screws
Disassembly & Assembly
See Section 4.2.3.5 on page 224.
See Figure 4-88.
See Figure 4-89.
See Figure 4-89.
Disassembly Procedure
See
PF ENC COVER B
C.B.P. M3x8
Tabs
Figure 4-88. Removing the PF ENC COVER B
See
Connector
Capacitor
PF Encoder
Sensor
Figure 4-89. Removing the PF Encoder Sensor
Revision B
Left Side of the Printer
C.P.P. M2.6x6
SCALE, PF
258