Epson Stylus Pro 7400 Service Manual page 66

EPSON Stylus Pro 7400/7800/9400/9800
If the width of image is larger than that of the specified printable area, the extended
width of the image is clipped off from its right side. In such case, a vertical page line is
not printed.
Roll Paper Width X
X
Figure 1-11. Roll Paper Margin (2)
Note "*": Top margin of roll paper can be set with "Set the paper top margin" (SN command).
When the printer receives the command, it determines the top margin as follows:
• When the "Roll Paper Margin" is set to other than Default
The printer creates a top margin according to the panel setting.
• When the "Roll Paper Margin" is set to Default
The printer creates a top margin according to the SN command.
If a top margin information is not included in the SN commands, the printer adopts
the default top margin setting.
Product Description
Clipped Area
X *
X
Printable Area
X
Cut Position or Border
Note 1: Using the Borderless Print function, left and right margins can be set to 0.
2: When the following patterns are printed, left and right margins are fixed to 3mm.
Adjustment Patterns
Nozzle Check Pattern
Auto Nozzle Check Pattern
Status Print
Job Information Print
User Paper Print
Paper Thickness Detection Pattern
Cutter Position Adjustment
Auto Nozzle Check for each job
Manual Uni-D
Manual Bi-D K
Manual Bi-D
F/W ROM Version Print
Control Panel
Revision B
Menu Command
Test Printing Menu NC Command
↑ ↑
↑
SS Command
↑ ↑
↑ ↑
↑
User Paper Setting Menu
↑
PRINTER SETUP
↑ ↑
GAP Adjustment Menu DT/DC Command
↑ ↑
↑ ↑
--- VI Command
66