Control Panel; Buttons And Functions - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800

1.4 Control Panel

1.4.1 Buttons and Functions

Power Pause Paper check Ink check LED
LED LED LED
Power Pause LCD
Figure 1-6. Panel Design
Message
Roll Paper Margin
Custom Paper No.
Paper Source
Platen Gap setting
Figure 1-7. LCD Panel
Product Description
Paper Feed Enter
Paper Source Paper Feed Menu
Roll Paper Counter
Maintenance Tank Counter
Ink Counter
(One bar is displayed on Stylus Pro
7400/7800)
1.4.1.1 LED
The following table describes the LED displays and status.
LED Color Displays
Power Green ON
Flashing*
OFF
Pause Yellow ON* 2
Flashing*
OFF
Paper Red ON
Check
Flashing*
OFF
Ink Red ON
Check
Flashing*
OFF
Note "*1": Alternately turns On and Off every 500 ms. In the case of maintenance call error,
they light for 100 ms at intervals of five seconds.
"*2": When a printer error occurs, printing operation is disabled and the Pause LED turns
ON.
Note : When a service call error occurs, the all LEDs flash.
Control Panel
Table 1-26. LED
Status
The power is ON.
1 Receiving data or executing power off sequence
The power is OFF.
Temporarily stopping the operation (The yellow light also
turns on when an error occurs).
1 ---
Ready for printing.
Impossible to make a print due to the paper status
1
• A paper feeding or ejecting error is occurring
• The Paper Near-End warning is occurring
• A maintenance call error is occurring.
The papers are in normal condition without an error or
warning.
An ink-related error is occurring
1 An ink-related warning is occurring
The inks are in normal condition without an error or
warning.
Revision B
36