Epson Stylus Pro 7400 Service Manual page 30

EPSON Stylus Pro 7400/7800/9400/9800
1.2.8.2 Vibration Resistance
Operating: 0.15 G, 10 to 55 Hz in X, Y, Z direction
Store: 0.50 G, 10 to 55 Hz in X, Y, Z direction
1.2.8.3 Shock Resistance
Operating: 1G within 1 millisecond in X, Y, Z direction
Store: 2G within 2 milliseconds in X, Y, Z direction
NOTE • Check that the printhead is capped when storing the printer for a long
period of time.
• When transporting the printer, check that the printhead is capped, all ink
cartridges are removed, and the ink cartridges covers are closed and fixed.
• If the printhead are not capped, turn the power back ON with the ink
cartridges installed, and then turn the power OFF again after confirming
the capping operation is complete.
• If the printer is left under an ambient temperature of minus 15
the printhead and ink cartridges will freeze.
If this happens, move the printer, or heat the room so that the ambient
°
temperature is 25 C, and leave the printer under the temperature for
approximately 3 hours to melt the ink.
Product Description
°
C, ink inside
Basic Specifications
Revision B
30