Epson Stylus Pro 7400 Service Manual page 379

EPSON Stylus Pro 7400/7800/9400/9800
[Lubrication 4]
Part Name Driven Roller C Assy.
Lubrication Point Contact point between the Arm Bracket and the Pressure Cam
• Stylus Pro 7400/7800: 8 points
• Stylus Pro 9400/9800: 14 points
Lubricants G-26
Amount A drop of 1 mm in diameter for about 2 mm length on the each contact
point
Remarks Use a small syringe or needle (equivalent to JIS17#).
Lubrication Point
Arm Bracket
Maintenance
Pressure Cam
Lubrication
[Lubrication 5]
Part Name CR Guide Rail
Lubrication Point Outside four surfaces on the CR Guide Rail on where the roller bearings
run through
Lubricants Super Multi Oil #32
Amount A drop of 1 mm in diameter for the full-length of each four surfaces
Remarks • Use a small syringe or needle (equivalent to JIS17#).
• Be sure to clean the surfaces before applying the lubricants.
CR Guide Rail
Lubrication Point
Revision B
Lubrication Point
379