Epson Stylus Pro 7400 Service Manual page 298

EPSON Stylus Pro 7400/7800/9400/9800
ADVANCED ADJUSTMENT
Adjustment
Auto Bi-D Adjustment
Manual Bi-D Adjustment
Destination Setting
PF Micro Feed Adjustment (Bi-D)
CHECK RESULTS
Adjustment
Check Nozzle
Check Alignment
Print Adjustment Check Pattern
Check Cutting
Print Image
RESET COUNTERS
Adjustment
Reset PG Switching Counter
Reset PF Motor Counter
Reset When CR Unit Change
Reset When Cleaning Unit Change
Reset When PrintHead Change
Reset When Cutter Solenoid Change
Reset Pump Counter
Reset Ink Information
Adjustment
Performs an automatic Bi-D adjustment by the Ink Mark Sensor. The adjustment patterns are printed out with
the platen gap set at 0.8 and 1.6.
Makes Bi-D adjustments for all nozzles.
Makes the destination settings.
Adjusts a paper feed amount to reduce bands appear on prints.
Checks the nozzles for clogging.
Checks the print alignment.
Prints all adjustment parameters and patterns.
Performs a roll paper cutting operation. The cutter performance can be checked.
Prints a sample image. Print quality can be checked.
Resets the PG switching counter.
Resets the cumulative travel distance of the PF Motor.
Resets the cumulative number of "Pass" times of the CR Motor.
Resets the life counter of the Cleaning Unit.
Resets the life counter of the Printhead.
Resets the counter of the Cutter Solenoid Unit.
Resets the counter of the Pump Unit.
Resets ink information set for each nozzle column.
General Overview
General Overview
General Overview
Overview
Revision B
Tool
Page
AU* 1 SM* 2 AT* 3
--- --- p.357
--- --- p.358
--- --- p.360
--- --- p.361
Tool
Page
1 2 3
AU* SM* AT*
--- --- p.362
--- --- p.363
--- --- p.364
--- --- p.365
--- --- p.366
Tool
Page
AU* 1 SM* 2 AT* 3
--- --- p.367
--- --- p.367
--- --- p.368
--- --- p.368
--- --- p.369
--- --- p.369
--- --- p.370
--- --- p.370
298