Job Information - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800
Paper Suction
The suction power to attract paper can be adjusted when the Paper Set Lever is
released, and when a paper is detected by the Rear Manual Feed sensor and the PE
sensor. The suction level is indicated by an icon as shown below.
Table 1-34. Paper Suction Icon
Suction Power
High 168%
Middle 60%
Low 0%
When rewinding roll paper to align its top edge with the guide line,
C H E C K
P O I N T setting the suction power to its maximum makes the work easier
and accurately.
Product Description
Icon
Control Panel

1.4.3 Job Information

Job Definition
Each print job is defined as a "Job"* and the printer stores a variety of information
on each job as job history. The following flowchart shows the storing procedure
inside the printer.
NOTE: As cleaning can be executed during printing, it is not defined as a job.
Stores the job information
The job finished normally
Count End
JE (Cancel)
Figure 1-9. Storing Job Information
Revision B
Stores the job information
Ready status
Count Start
The job is canceled
JS
Printing
Count End
JE (Cancel)
48