Epson Stylus Pro 7400 Service Manual page 67

EPSON Stylus Pro 7400/7800/9400/9800
Roll Paper Margin menu
PRINTER SETUP
CODE PAGE
ROLL PAPER MARGIN
PAPER SIZE CHECK
Product Description
ROLL PAPER MARGIN
DEFAULT
Setting
TOP/BOTTOM 15mm
TOP 35/BOTTOM 15mm
ROLL PAPER MARGIN
DEFAULT
Setting
TOP/BOTTOM 15mm
TOP 35/BOTTOM 15mm
ROLL PAPER MARGIN
TOP/BOTTOM 15mm
Setting
TOP 35/BOTTOM 15mm
15mm
ROLL PAPER MARGIN
TOP 35/BOTTOM 15mm
Setting
15mm
3mm
ROLL PAPER MARGIN
TOP 35/BOTTOM 15mm
Setting
15mm
3mm
1.4.4.9 Page Size Check
The printer automatically detects the width of loaded media if this function is set to
ON. Disabling this (setting it to OFF) is not recommended especially when performing
a Borderless printing because the printer performs a print job even if the specified print
size (width) is bigger than the width of the loaded paper and result in printing directly
on the platen.
When paper initializing or print starting, for distance between grid roller and #1 nozzle,
paper is fed unconditionally. The print starts from the position. (No back-feed with
other sequences) Although the paper that is under grid roller will be wasteful, place
emphasis on printing even for low reflection paper.
Cut sheets and auto loading have same specification.
The above paper width detection OFF sequence is just for the first page in case of roll
paper. Paper auto cutting is not checked whether it cuts off or not.
If this function is set to OFF, the Paper Skew Check for a cut sheet at the time it is
loaded is not performed.
Paper Size Check menu
PRINTER SETUP
ROLL PAPER MARGIN
PAPER SIZE CHECK
PAPER SKEW CHECK
Control Panel
Revision B
PAPER SIZE CHECK
ON
Setting
OFF
PAPER SIZE CHECK
ON
Setting
OFF
67