EPSON Stylus Pro 7400/7800/9400/9800
Check Procedure
1.
Click the [Check] button to print the check pattern.
2.
Check if the printed lines align with the edge of the platen tabs holding down
the Ink Pad as shown in
Figure
If the lines are not in proper alignment with the platen tabs, click the [Back]
button to perform the adjustment again.
Adjustment
5-56. If it does, click the [Finish] button.
Figure 5-55. [Platen Position Adjustment] Screen (2)
Basic Adjustment
OK
NG
Figure 5-56. Adjustment Pattern
Revision B
335