Epson Stylus Pro 7400 Service Manual page 213

EPSON Stylus Pro 7400/7800/9400/9800
START
PANEL ASSY. (p.220)
Maintenance Tank (p.217)
H TOP COVER ASSY. (p.221)
Cutter (p.218)
FRONT COVER ASSY. (p.230)
Front Sensor (p.231)
Ink Cartridges (p.216)
COVER, REAR (p.225)
P GUIDE L ASSY. (p.227)
Spindle (p.219)
Note : Parts or units indicated in broken lines do not mean that they can be omitted to disassemble.
They also should be disassembled for disassembling the following parts or units in the flow.
Disassembly & Assembly
Spindle (p.219)
Maintenance Tank (p.217)
Spindle (p.219) H TOP COVER ASSY. (p.221)
BOARD ASSY., SUB (p.236)
CR HP Sensor (p.244)
PG HP Sensor (p.245)
P Thick1 Sensor, P Thick2 Sensor (p.261)
P Rear Sensor (p.262)
CR Encoder Sensor (p.246)
Cutter (p.218)
CUTTER SOLENOID ASSY. (p.248)
P Edge Sensor (p.265)
PRINT HEAD (p.267)
VALVE ASSY., HEAD; C (p.271)
I/H COVER R ASSY. (p.222)
I/H COVER L ASSY. (p.222)
BOARD ASSY., MAIN (p.232)
P/S BOARD ASSY. (p.234)
INLETS ASSY. (p.235)
PUMP ASSY., SUPPLY (p.291)
FRONT COVER ASSY. (p.230) VACUUM FAN ASSY. (p.252)
ROLL TOP COVER (p.228)
Figure 4-2. Disassembly Process Flowchart
Disassembly Procedure
H TOP COVER ASSY. (p.221)
Ink Cartridges (p.216)
I/H COVER R ASSY. (p.222)
R SIDE COVER ASSY. (p.223)
BOARD ASSY., SUB; B (p.238)
CR BELT (p.240)
I/H COVER L ASSY. (p.222)
HOLDER ASSY., IC, RIGHT (p.275)
PUMP CAP ASSY. (p.284)
CLEANER, HEAD, A, ASP (p.287)
BOX ASSY., FLUSHING (R) (p.288)
Ink Cartridges (p.216)
I/H COVER L ASSY. (p.222)
L SIDE COVER ASSY. (p.224)
BOARD ASSY., SUB; C (p.239)
SCALE, CR (p.251)
PF MOTOR ASSY. (p.255)
PF Encoder Sensor (p.258)
SCALE, PF (p.260)
IM (Ink Mark) Sensor (p.263)
HOLDER ASSY., IC, LEFT (p.279)
BOX ASSY., FLUSHING (L) (p.290)
Revision B
L SIDE COVER ASSY. (p.224)
CR MOTOR ASSY. (p.243)
213