Removing The Panel Unit And Housing - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800

4.2.3 Removing the Panel Unit and Housing

4.2.3.1 PANEL ASSY.
1. Unlock the CARRIAGE ASSY. and move the unit to the center.
page 215.
When performing the next step, be careful not to pull the PANEL
C A U T I O N
ASSY. too much as it is still connected to the printer with the FFC.
2. Release the two hooked tabs that secure the PANEL ASSY. from the inner side,
and remove the PANEL ASSY.
First attach the two hooked tabs of the PANEL ASSY. to the R
SIDE COVER ASSY., and then push the front side edge of the
PANEL ASSY. into the R SIDE COVER ASSY.
R SIDE COVER ASSY.
Figure 4-15. Reinstalling the PANEL ASSY.
3. Disconnect the FFC from the PANEL ASSY.
Disassembly & Assembly
See Section on
See Figure 4-16.
See Figure 4-17.
Figure 4-16. Hooked Tabs for Securing the PANEL ASSY.
Connector
Disassembly Procedure
Hooked tabs
FFC
Figure 4-17. Removing the PANEL ASSY.
Revision B
PANEL ASSY.
220