Epson Stylus Pro 7400 Service Manual page 6

B September 2, 2005 [Chapter 5]
• Descriptions have been added in Table 5-1. Parts and Units that Require Adjustments (Page
• Descriptions have been added in Table 5-2. Required Adjustments in the Order of Execution (Page
• Descriptions have been added in Basic Adjustment (Page
• Made changes in Table 5-3. Tools for Adjustments (Page
• Made changes in "System Requirements" in
• Made changes in 5.2.2 Cutter Position/Height Adjustment (Page
• Made changes in 5.2.3 Paper Thickness Sensor Position Adjustment (Page
• "Shield Cap" has been changed to "Seal Cap" in
• Made changes in 5.3.4 T&B&S (Roll Paper) (Page
• Made changes in 5.3.5 T&B&S + 980mm Band Feed (Page
• Made changes in 5.3.7 Nozzle Bi-D Adjustment (Page
• Made changes in 5.3.8 Print Head Slant Adjustment (PF) (Page
• Made changes in 5.3.9 Print Head Slant Adjustment (CR) (Page
• Made changes in 5.3.10 Ink Mark Sensor Level Adjustment (Page
• Made changes in 5.3.11 Auto Uni-D Adjustment (Page
• Made changes in 5.3.12 Auto Bi-D Adjustment (P.G. 0.8/1.6) (Page
• Made changes in 5.3.13 Ink Mark Sensor Adjustment for Auto Nozzle Check (Page
• Made changes in 5.3.14 Skew Check (Page
• Made changes in 5.3.15 Platen Position Adjustment (Page
• Made changes in 5.3.16 980mm Band Feed Adjustment (Page
• 5.3.22 Colorimetric Calibration (Color ID) (Page 341)
• Made changes in 5.4.1 Auto Bi-D Adjustment (Page
• Made changes in 5.4.2 Manual Bi-D Adjustment (Page
• Made changes in 5.5.1 Check Nozzle (Page
• Made changes in 5.5.2 Check Alignment (Page
• Made changes in 5.5.3 Print Adjustment Check Pattern (Page
• Made changes in 5.5.4 Check Cutting (Page
• 5.8 Model Setting (when replacing the Main Board) (Page 372)
297).
299).
5.1.7 Adjustment Program Basic Operations (Page
302).
304).
5.2.8 Air Leak Check (Page 310).
316).
318).
321).
322).
325).
328).
329).
330).
333).
334).
336).
have been added.
357).
358).
362).
363).
364).
365).
have been added.
293).
294).
300).
331).