Tools For Adjustments - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800

5.1.6 Tools for Adjustments

The table below shows the tools required for adjusting the Stylus Pro 7400/7800/9400/
9800.
Table 5-3. Tools for Adjustments
Type Name
Hard Ink Mark Sensor Position Jig *
Tool
P THICK Sensor Position Jig *
Cutter Position Jig
Air leak measurement jig
Kimoto, Micro Trace #300
Tension Gauge F770
Tension Gauge (10N)
Ink Cartridges (8 pcs.)* 2
2
Maintenance Tank*
Premium Glossy Photo 24" (610 mm)
Paper (Stylus Pro 7400/7800)
44" (1118 mm)
(Stylus Pro 9400/9800)
Doubleweight Matte 24" (610 mm)
Paper (Stylus Pro 7400/7800)
44" (1118 mm)
(Stylus Pro 9400/9800)
Soft- Adjustment Program
ware
NVRAM backup utility
EPSON LFP Remote Panel tool
Note "*1": The jig comes in a kit with multiple parts.
"*2": Use when make test prints for adjustment.
Adjustment
Part Number Remarks
1 1424365 For adjusting,
checking
1
1424364 Thickness:
0.2/0.3/0.5/0.6
1424366
TBD
1057723
1060744
1401952
See Table 5-4 Consumables
C12C890191 Option
S041638 EPSON genuine
S041640 EPSON genuine
S041385 EPSON genuine
S041387 EPSON genuine
--- Supplies
--- Supplies
--- Supplies
Ink Name
Photo Black
Matte Black
Cyan
Magenta
Yellow
Light Black
Light Cyan
---
Light Magenta
---
Light Light Black
---
---
---
Overview
Table 5-4. Ink Cartridge
Part No. (Stylus Pro 7800/9800) Part No. (Stylus Pro 7400/9400)
C13T562130
C13T566830
C13T562230
C13T562330
C13T562430
C13T562730
C13T562530
C13T562630
C13T562930
Revision B
---
C13T566830
C13T566230
C13T566330
C13T566430
---
---
---
---
299