Epson Stylus Pro 7400 Service Manual page 271

EPSON Stylus Pro 7400/7800/9400/9800
4.2.7.2 VALVE ASSY., HEAD; C
1. Remove the Damper Unit. See Section 4.2.7.1 on page 267.
Beware of the following items when performing the next step.
C A U T I O N
As remaining ink may leak or spatter, have a waste cloth
beforehand to wipe out it.
Exercise care to avoid letting the dust or any foreign materials
get inside the TUBE, SUPPLY, INK.
Be careful not to fold the TUBU, SUPPLY, INK or damage it
by hitting it against frame edges.
2. Loosen the eight screws that secure the TUBE, SUPPLY, INK.
CONNECTING SCREW, M7: 8 pcs.
3. Pull out the eight TUBE, SUPPLY, INK from the VALVE ASSY., HEAD; C and
release them from the retaining tabs.
Disassembly & Assembly
Retaining tabs
CONNECTING
SCREW, M7
Figure 4-111. Removing the TUBE, SUPPLY, INK
Disassembly Procedure
TUBE, SUPPLY, INK
VALVE ASSY., HEAD; C
Revision B
271