Epson Stylus Pro 7400 Service Manual page 283

EPSON Stylus Pro 7400/7800/9400/9800
Beware of the following items when performing the next step.
C A U T I O N
As remaining ink may leak or spatter, have a waste cloth
beforehand to wipe out it.
Exercise care to avoid letting the dust or any foreign materials
get inside the TUBE, SUPPLY, INK.
12. Loosen the four screws that secure the four TUBE, SUPPLY, INK, and remove
them from the HOLDER ASSY., IC, LEFT.
Four Coupling Screws
Make sure that the O-RING is attached to the leading end of
each one of the four TUBE, SUPPLY, INK.
O-RING
Figure 4-133. Reinstalling the TUBE, SUPPLY, INK
Whenever the HOLDER ASSY., IC, LEFT is reinstalled or
A D J U S T M E N T
R E Q U I R E D
replaced, the corresponding adjustment must be carried out.
Chapter 5 on page 292.
Disassembly & Assembly
Figure 4-134. Removing the HOLDER ASSY., IC, LEFT (2)
See
Disassembly Procedure
Revision B
Coupling Screws
283