EPSON Stylus Pro 7400/7800/9400/9800
4.2.2.2 Maintenance Tank
When removing the Maintenance Tank in the next step, be sure not
C A U T I O N
to touch the IC chip on the tank. Doing so may cause a malfunction
of the printer.
The Stylus Pro 9400/9800 have two Maintenance Tanks, and the
C H E C K
P O I N T
7400/7800 have one tank on its right side.
1.
Pull out the Maintenance Tank while holding the printer, and remove the tank
putting your other hand on it not to tilt it.
Disassembly & Assembly
Figure 4-9. Removing the Maintenance Tank
Disassembly Procedure
Revision B
Maintenance
Tank
IC Chip
217