Optional Units And Consumables; Ink Cartridge - Epson Stylus Pro 7400 Service Manual

EPSON Stylus Pro 7400/7800/9400/9800

1.7 Optional Units and Consumables

1.7.1 Ink Cartridge

Selection of ink types, detection of cartridges and the amount of remaining ink are
controlled by CSIC.
When installing the pigment ink cartridges, shake them
C H E C K
P O I N T horizontally after unpacking them for about five seconds
beforehand to ensure the designed print quality.
SPECIFICATION
Type: Pigment
Form: Special ink cartridge
Ink capacity:
110 ml
220 ml
Dimension:
110 ml / 220 ml
(W): 27.1 mm x (D): 185 mm x (H): 107 mm
Total mass:
110 ml: Approx. 250 g
220 ml: Approx. 370 g
Available ink quantity:
110 ml: Over 103 ml
220 ml: Over 210 ml
Color:
Stylus Pro 7800, Stylus Pro 9800
Photo black, magenta, light magenta, cyan, light cyan, yellow, light black,
matte black, light light black
Stylus Pro 7400, Stylus Pro 9400
Matte black, magenta, cyan, yellow
Product Description
Environmental requirements
Temperature:
Relative temperature: 5% ~ 85% (without freezing)
Ink in the cartridge will freeze if it is left under minus 10
C H E C K
P O I N T
degrees C temperature. (Reference: Takes about three hours
to thaw ink frozen in minus 20 degrees C completely under 25
degrees C.)
Storage temperature
During packed storage
Loading printer
During transportation
If you remove an ink cartridge before it reaches the ink out state,
C A U T I O N
you should store it under the same ambient conditions as for the
printer body in such a way that the ink discharge opening is
protected from dust intrusion. The ink cartridge stored as such and
installed again can be used if it is within the term of availability.
Life:
Insured date of printing quality:
Installation position:
See "1.1.1 Features" (p.11)
ink cartridge.
Optional Units and Consumables
10ºC ~ 40ºC
Condition Temperature
–30ºC to 40ºC Within 1 month for 40ºC
–20ºC to 40ºC Within 1 month for 40ºC
–30ºC to 60ºC • Within 1 month for 40ºC
• Within 120 hours for 60ºC
2 years (Total time of before and after of installing
printer.)
Pigment 6 month (After printer is installed.)
for the information on the installation position of each
Revision B
Remarks
144