Menu: Viewing And Configuring Timep - HP ProCurve 2610-PWR Management And Configuration Manual

Menu: Viewing and Configuring TimeP

To View, Enable, and Modify the TimeP Protocol:
1. From the Main Menu, select:
Figure 9-9. The System Information Screen (Default Values)
2. Press
3. Use [v] to move the cursor to the
4. If
5. Do one of the following:
2. Switch Configuration...
1. System Information
[E] (for Edit ). The cursor moves to the
TIMEP is not already selected, use the Space bar to select
press [v] once to display and move to the
• Use the Space bar to select the
the cursor to the Poll Interval
TimeP: Viewing, Selecting, and Configuring
Time Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None
System Name
Time Sync Method
TimeP Mode
mode, then press [v] to move
DHCP
field, and go to step 6.
Time Protocols
field.
field.
TIMEP , then
field.
9-15