Alert Types And Detailed Views - HP ProCurve 2610-PWR Management And Configuration Manual

Alert Types and Detailed Views

The web browser interface generates the following alert types:
• Auto Partition
• Backup Transition
• Excessive broadcasts
• Excessive CRC/alignment errors • Network Loop
• Excessive jabbering
• Excessive late collisions
• First Time Install
• Full-Duplex Mismatch
• Half-Duplex Mismatch
N o t e
When troubleshooting the sources of alerts, it may be helpful to check the
switch's Port Status and Port Counter windows and the Event Log in the
console interface.
By double clicking on Alert Entries, the web browser interface displays a
Detail View or separate window detailing information about the events. The
Detail View contains a description of the problem and a possible solution. It
also provides four management buttons:
■
■
■
A sample Detail View describing an Excessive CRC/Alignment Error alert is
shown here.
Acknowledge Event – removes the New symbol from the log entry
Delete Event – removes the alert from the Alert Log
Cancel Button – closes the detail view with no change to the status of
the alert and returns you to the Overview screen.
Using the Web Browser Interface
Status Reporting Features
• High collision or drop rate
• Loss of Link
• Mis-Configured SQE
• Polarity Reversal
• Security Violation
• Stuck 10BaseT Port
• Too many undersized (runt)/giant
packets
• Transceiver Hot Swap
5-19