HP ProCurve 2610-PWR Management And Configuration Manual page 293

Figure 13-4 shows the assigning of the Operator community on MgrStation1
to the CommunityOperatorReadWrite group. Any other Operator only has an
access level of CommunityOperatorReadOnly.
Add mapping to allow write access for
Operator community on MgrStation1
Figure 13-4. Assigning a Community to a Group Access Level
Table 13-1. SNMP Community Features
Feature
show
configure identity information
configure community names
Use SNMP communities to restrict access to the switch by SNMP management
stations by adding, editing, or deleting SNMP communities. You can configure
up to five SNMP communities, each with either an operator-level or a manager-
level view, and either restricted or unrestricted write access.
Using SNMP requires that the switch have an IP address and subnet mask
compatible with your network.
SNMP
communities
MIB view for a community name
(operator, manager)
write access for default
community name
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Two Operator Access Levels
Default Menu CLI
n/a page
13-14
none —
public page
13-14
manager "
"
unrestricted "
Web
page —
13-16
page
13-17
page —
13-17
"
"
"
13-13