HP ProCurve 2610-PWR Management And Configuration Manual page 289

To establish a user you must first add the user names to the list of known
users. Add user names with the snmpv3 user CLI command.
Add user Network Mgr with
authentication and privacy
Figure 13-2. Adding and showing Users for SNMPv3
[no] snmpv3 group group_name user user_name sec-model <ver1| ver2c
| ver3> (— Continued —)
user user_name
This is the user to be added to the access group. This
must match the user name added with the
command
.
sec-model <ver1 | ver2c | ver3>
This defines which security model to use for the added
user. A SNMPv3 access Group should only use the ver3
security model.
Authentication is set to Md5
and the password is authpass
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Add user Network Admin with no
Authentication or Privacy
Privacy is used and the
password is set privpass
snmpv3 user
13-9