Group Access Levels - HP ProCurve 2610-PWR Management And Configuration Manual

Group Access Levels

The switch supports eight predefined group access levels. There are four
levels for use with version 3 users and four are used for access by version 2c
or version 1 management applications.
Group Name Group Access Type
managerpriv Ver3 Must have Authentication
and Privacy
managerauth Ver3 Must have Authentication
operatorauth Ver3 Must have Authentication
operatornoauth Ver3 No Authentication
commanagerrw Ver2c or Ver1
commanagerr Ver2c or Ver1
comoperatorrw Ver2c or Ver1
comoperatorr Ver2c or Ver1
Each view allows you to view or modify a different set of MIBs.
■
■
■
■
N o t e
All access groups and views are predefined on the switch. There is no method
to modify or add groups or views to those that are pre-defined on the switch.
Manager Read View – access to all managed objects
Manager Write View – access to all managed objects except the follow­
ing: vacmContextTable, vacmAccessTable, vacmViewTreeFamilyTable
OperatorReadView – no access to icfSecurityMIB, ProCurveIpTftp-
Mode, vacmContextTable, vacmAccessTable, vacmViewTreeFami­
lyTable, usmUserTable, snmpCommunityTable
Discovery View – Access limited to samplingProbe MIB.
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Group Read View
ManagerReadView
ManagerReadView
OperatorReadView
OperatorReadView
ManagerReadView
ManagerReadView
OperatorReadView
OperatorReadView
Group Write View
ManagerWriteView
ManagerWriteView
DiscoveryView
DiscoveryView
ManagerWriteView
DiscoveryView
OperatorReadView
DiscoveryView
13-11