Page of 24
QuickSpecs
Overview
Models
HP 2615-8-PoE Switch
Scalable 10/100 connectivity
Layer 2 and 3 switching capabilities
sFlow, ACLs, and rate limiting
Energy-efficient design and quiet operation
Rack-mountable, compact form factor
The HP 2615-8-PoE Switch is a fully managed 8-port 10/100 switch with an additional two dual-personality Gigabit Ethernet ports for
copper or SFP connectivity. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, a
free lifetime warranty, and free software updates, the HP 2615-8-PoE Switch is a cost-effective solution.
The HP 2615-8-PoE Switch is fanless, providing quiet operation and making it ideal for deployments in open spaces. In addition, the
compact form factor allows for flexible deployments, including wall, surface, or rack mounting.
These switches can be deployed at enterprise edge and remote branch offices, as well as converged networks.
Quality of Service (QoS)
Selectable queue configuration
performance and/or traffic reliability can be increased by selecting the number of queues that best meet the requirements of
network applications; the switch will map 8 priorities to either 2 or 4 queues
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source
port, and DiffServ
Layer 4 prioritization
enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p)
allows real-time traffic classification into eight priority levels mapped to four queues
Rate limiting
per-port ingress-enforced maximum
Flow control
helps ensure reliable communications during full-duplex operation
Type of service
IP precedence
honors IP precedence bits and allows mapping to a priority queue
Differentiated Services Code Point values
honors Differentiated Services Code Point (DSCP) bits and allows mapping to a priority queue
Management
DA - 13673 North America — Version 11 — December 9, 2013
HP 2615 Switch Series
J9565A
Page 1

Advertising

   Also See for HP 2615 series

   Related Manuals for HP 2615 series

   Summary of Contents for HP 2615 series

  • Page 1: Key Features, Product Overview, Features And Benefits

    HP 2615-8-PoE Switch is a cost-effective solution. The HP 2615-8-PoE Switch is fanless, providing quiet operation and making it ideal for deployments in open spaces. In addition, the compact form factor allows for flexible deployments, including wall, surface, or rack mounting.

  • Page 2

    QuickSpecs HP 2615 Switch Series Overview Choice of management interfaces Web graphical user interface (GUI) easy-to-use graphical interface allows configuration of the switch from any Web browser Command-line interface (CLI) robust command-line interface provides advanced configuration and diagnostics Simple Network Management Protocol (SNMPv2c/SNMPv3)

  • Page 3

    QuickSpecs HP 2615 Switch Series Overview Port trunking and link aggregation Trunking supports up to eight links per trunk to increase bandwidth and create redundant connections IEEE 802.3ad Link Aggregation Protocol (LACP) eases configuration of trunks through automatic configuration SmartLink...

  • Page 4

    QuickSpecs HP 2615 Switch Series Overview blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data MAC address lockout prevents configured particular MAC addresses from connecting to the network MAC address lockdown allows only specified MAC addresses access to the network on a specified port Multiple user authentication methods IEEE 802.1X...

  • Page 5

    Electronic and telephone support (for Lifetime Warranty 2.0) limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to www.hp.com/networking/contact-support;...

  • Page 6

    Overview †HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty.

  • Page 7

    1 - J9701A - 1U - Height Configuration Rules: Note 1 The following Transceivers install into this switch: HP X121 1G SFP LC SX Transceiver J4858C HP X121 1G SFP LC LX Transceiver J4859C HP X111 100M SFP LC FX Transceiver...

  • Page 8

    Switch Enclosure Options Rack Mount Kit HP X410 1U Univ 4-post Rack Mnt Kit J9583A See Configuration Note:1 HP X410 1U Integ Univ 4-post Rck Mnt Kit J9583AZ DA - 13673 North America — Version 11 — December 9, 2013 Page 8...

  • Page 9

    See Configuration Note:1 Cofiguration Rules: Note 1 If this Mounting Kit is order with #0D1 or Z then it integrates to the HP Universal Rack. (not the switch) External Redundant Power Supplies HP 600 Redundant and Extrnl Power Supply J8168A...

  • Page 10: Technical Specifications

    QuickSpecs HP 2615 Switch Series Technical Specifications HP 2615-8-PoE Switch (J9565A) I/O ports and slots 8 RJ-45 autosensing 10/100 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3af PoE); Media Type: Auto-MDIX; Duplex: half or full 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T;...

  • Page 11

    Flicker EN 61000-3-3, IEC 61000-3-3 Management HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B"...

  • Page 12

    Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. Standards and protocols Denial of service protection RFC 4113 MIB for UDP...

  • Page 13

    QuickSpecs HP 2615 Switch Series Technical Specifications RFC 2131 DHCP RFC 2453 RIPv2 Security UDLD (Uni-directional Link Detection) IEEE 802.1X Port Based Network Access Control RFC 1492 TACACS+ IP multicast RFC 2138 RADIUS Authentication RFC 3376 IGMPv3 (host joins only)

  • Page 14

    HP X122 1G SFP LC BX-U Transceiver J9143B HP 0.5 m Multimode OM3 LC/LC Optical Cable AJ833A HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable QK732A HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable QK733A HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable...

  • Page 15

    For details about services and response times in your area, please contact your local HP sales office. HP X121 1G SFP LC LX Ports 1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only...

  • Page 16

    For details about services and response times in your area, please contact your local HP sales office. HP X121 1G SFP LC LH Ports 1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics); Duplex:...

  • Page 17

    Power consumption is 1.1 watt maximum. For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page. The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE- standard 100BASE-BX10-U ("upstream") device.

  • Page 18

    For details about services and response times in your area, please contact your local HP sales office. HP X112 100M SFP LC BX-U Ports 1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex: full...

  • Page 19

    Power consumption is 1 watt maximum. For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page. The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE- standard 1000BASE-BX10-U ("upstream") device.

  • Page 20

    Accessory Product Details For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page. The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE- standard 1000BASE-BX10-D ("downstream") device.

  • Page 21

    For details about services and response times in your area, please contact your local HP sales office. HP Premier Flex LC/LC Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

  • Page 22

    For details about services and response times in your area, please contact your local HP sales office. HP Premier Flex LC/LC Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

  • Page 23

    For details about services and response times in your area, please contact your local HP sales office. HP Premier Flex LC/LC Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.

  • Page 24

    The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Comments to this Manuals

Symbols: 0
Latest comments: