HP ProCurve 2610-PWR Management And Configuration Manual page 181

Figure 9-7. Example of SNTP with Time Sychronization Disabled
Disabling the SNTP Mode. If you want to prevent SNTP from being used
even if selected by
eter), configure the SNTP mode as disabled.
Syntax:
For example, if the switch is running SNTP in Unicast mode with an SNTP
server at 10.28.227.141 and a server version of 3 (the default),
the SNTP configuration as shown below, and disables time synchronization
on the switch.
Figure 9-8. Example of Disabling Time Synchronization by Disabling the SNTP Mode
(or the Menu interface's
timesync
no sntp
Disables SNTP by changing the SNTP mode
configuration to
Even though the Time Sync Mode is set to Sntp,
time synchronization is disabled because no
sntp has disabled the SNTP Mode parameter.
SNTP: Viewing, Selecting, and Configuring
Time Sync Method
.
Disabled
Time Protocols
param­
changes
no sntp
9-13