Switch-To-Switch Download; Menu: Switch-To-Switch Download To Primary Flash - HP ProCurve 2610-PWR Management And Configuration Manual

Procurve 2610 series procurve 2610-pwr series
Hide thumbs Also See for ProCurve 2610-PWR:
Table of Contents

Advertisement

File Transfers
Downloading Switch Software

Switch-to-Switch Download

You can use TFTP to transfer a switch software file between two ProCurve
switches that use the same software code base. The menu interface enables
you to transfer primary-to-primary or secondary-to-primary. The CLI enables
all combinations of flash location options.

Menu: Switch-to-Switch Download to Primary Flash

Using the menu interface, you can download switch software from either the
primary or secondary flash of one switch to the primary flash of another
switch.
1. From the switch console Main Menu in the switch to receive the down­
2. Ensure that the Method parameter is set to TFTP (the default).
3. In the TFTP Server field, enter the IP address of the remote switch contain­
4. For the Remote File Name, enter one of the following:
5. Press
6. A "progress" bar indicates the progress of the download. When the entire
7. After the primary flash memory has been updated with the new operating
8. To confirm that the operating system downloaded correctly:
A-14
load, select 7. Download OS screen.
ing the switch software you want to download.
To download the switch software from the primary flash of the source
switch, type flash or /os/primary in lowercase characters.
To download the switch software from the secondary flash of the
source switch, type /os/secondary.
(for eXecute) to begin the switch software download.
[Enter]
, then
[X]
operating system has been received, all activity on the switch halts and
the following messages appear:
Validating and writing system software to FLASH...
system, you must reboot the switch to implement the newly downloaded
software. From the Main Menu, press
see this prompt:
Continue reboot of system?
Press the space bar once to change No to Yes, then press
the reboot.
a. From the Main Menu, select
Status and Counters
(for Reboot Switch). You will then
[6]
:
No
[Enter]
to begin

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents