HP ProCurve 2610-PWR Management And Configuration Manual page 174

Time Protocols
SNTP: Viewing, Selecting, and Configuring
Figure 9-1. The System Information Screen (Default Values)
2. Press
3. Use [v] to move the cursor to the
4. Use the Space bar to select
5. Do one of the following:
9-6
[E] (for Edit ). The cursor moves to the
to the SNTP Mode field.
• Use the Space bar to select the
move the cursor to the
Broadcast mode details, see "SNTP Operating Modes" on
page 9-2.)
• Use the Space bar to select the
following:
i. Press [>] to move the cursor to the
Time Protocol Selection Parameter
– TIMEP
– SNTP
– None
System Name
Time Sync Method
, then press [v] once to display and move
SNTP
mode, then press [v] to
Broadcast
Poll Interval field, and go to step 6. (For
mode, then do the
Unicast
Server Address
field.
field.
field.