Cli: Viewing Port Status And Configuring Port Parameters; Using The Cli To View Port Status - HP ProCurve 2610-PWR Management And Configuration Manual

Port Status and Basic Configuration
Viewing Port Status and Configuring Port Parameters
Figure 10-2. Example of Port/Trunk Settings with a Trunk Group Configured
2. Press [E] (for Edit). The cursor moves to the Enabled field for the first port.
3. Refer to the online help provided with this screen for further information
4. When you have finished making changes to the above parameters, press
CLI: Viewing Port Status and Configuring Port
Parameters
Port Status and Configuration Commands
From the CLI, you can configure and view all port parameter settings and view
all port status indicators.

Using the CLI To View Port Status

Use the following commands to display port status and configuration:
■
10-8
on configuration options for these features.
[Enter], then press [S] (for Save).
show interfaces brief
show interfaces config
interface
show spanning tree
show tech transceivers
show interfaces brief: Lists the full status and configuration for all ports
on the switch.
below
page 10-9
page 10-10
page 10-10
page 10-15