HP ProCurve 2610-PWR Management And Configuration Manual page 79

Figure 5-3. The Device Passwords Window
To set the passwords:
1. Access the Device Passwords screen by one of the following methods:
2. Click in the appropriate box in the Device Passwords window and enter
3. Click on
N o t e
Passwords you assign in the web browser interface will overwrite previous
passwords assigned in either the web browser interface, the Command
Prompt, or the switch console. That is, the most recently assigned passwords
are the switch's passwords, regardless of which interface was used to assign
the string.
• If the Alert Log includes a "First Time Install" event entry, double
click on this event, then, in the resulting display, click on the
secure access to the device link.
Select the Security tab.
•
user names and passwords. You will be required to repeat the password
strings in the confirmation boxes.
Both the user names and passwords can be up to 16 printable ASCII
characters.
[Apply Changes] to activate the user names and passwords.
Using the Web Browser Interface
Tasks for Your First Web Browser Interface Session
5-9