How To Use Pre-Call And Mid-Call Services; Procedures For Using Pre-Call Services; Access Voicemail; Change Your Pre-Call Service Access Code - Cisco ATA186-I1 Administrator's Manual

Procedures for Using Pre-call Services

Access Voicemail

To access your voice-mail box, press the first digit in your pre-call service access code (* by default)
then press 0 on your telephone keypad. To change the first digit of your pre-call service access code, see
the

Change Your Pre-Call Service Access Code

You can use the default asterisk key (*) or the pound key (#) as the first digit in your pre-call service
access code. To change this setting, use Bit 25 of the ConnectMode parameter (see the
section on page

Activate Call-Forward-All

Use this feature to send all calls from one telephone number to another telephone number. To activate
Call-Forward-All, follow these steps:
Procedure
Press ** then 1 on your telephone keypad. You will receive a confirmation tone.
Step 1
Enter the telephone number to which you want to send the calls. A confirmation tone will sound.
Step 2
Hang up.
Step 3

Cancel Call-Forward-All

To cancel Call-Forward-All, follow these steps:
Procedure
Press ** then 2 on your telephone keypad. You will receive a confirmation tone.
Step 1
Hang up.
Step 2

Redial

Use this feature to call the last number dialed. To activate Redial, press * then # on your telephone
keypad.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
A-2
"Change Your Pre-Call Service Access Code" section on page
5-21).
Appendix A

How to Use Pre-call and Mid-call Services

A-2.
"ConnectMode"
OL-4652-01