Table of Contents
Advertisement
Identifying Interface Addresses
1. Port adapter slot 0 is reserved for the Fast Ethernet port on the I/O controller (if present).
2. Port adapter slot 0 can accept the Port Adapter Jacket Card if an NPE-G1 or NPE-G2 are installed.
3. Port adapter slot 0 is reserved for the Fast Ethernet port on the I/O controller (if present).
Cisco 7200 Series Routers Interface Addresses
This section describes how to identify the interface addresses used for the PA-MC-2T3+ in Cisco 7200
series routers. The interface address is composed of a two-part number in the format
port-adapter-slot-number/interface-port-number. See
In Cisco 7200 series routers, port adapter slots are numbered from the lower left to the upper right,
beginning with port adapter slot 1 and continuing through port adapter slot 2 for the Cisco 7202, slot 4
for the Cisco 7204 and Cisco 7204VXR, and slot 6 for the Cisco 7206 and Cisco 7206VXR. (Port
adapter slot 0 is reserved for the optional Fast Ethernet port on the I/O controller—if present.)
The interface addresses of the interfaces on the PA-MC-2T3+ in port adapter slot 1 are 1/0 through 1/1
(port adapter slot 1 and interfaces 0 and 1). If the PA-MC-2T3+ was in port adapter slot 4, these same
interfaces would be numbered 4/0 through 4/1 (port adapter slot 4 and interfaces 0 and 1).
Cisco 7301 Router Interface Addresses
This section describes how to identify addresses used for the PA-MC-2T3+ in the Cisco 7301 router. In
the Cisco 7301 router, slot 1 is the port adapter slot you use for the PA-MC-2T3+. (See
The interface address is composed of a two-part number in the format
port-adapter-slot-number/interface-port-number. See
format.
Cisco 7304 PCI Port Adapter Carrier Card Interface Addresses
This section describes how to identify the interface addresses used for the PA-MC-2T3+ in the Cisco
7304 PCI Port Adapter Carrier Card in Cisco 7304 routers. The interface address is made of a two-part
number in the format port-adapter-slot-number/interface-port-number.
The Cisco 7304 PCI Port Adapter Carrier Card installs into Cisco 7304 router module slots 2 through 5
(See
example, the interface address of port 0 on a PA-MC-2T3+, in which the Cisco 7304 PCI Port Adapter
Carrier Card is installed in Cisco 7304 router module slot 3, would be numbered 3/0.
Cisco 7401ASR Router Interface Addresses
This section describes how to identify addresses used for the PA-MC-2T3+ in the Cisco 7401ASR router.
In the Cisco 7401ASR router, slot 1 is the port adapter slot you use for the PA-MC-2T3+.
(See
port-adapter-slot-number/interface-port-number. See
format.
PA-MC-2T3+ Multi-Channel T3 Port Adapter Installation and Configuration
1-12
Figure
1-7.) The port-adapter-slot-number is the Cisco 7304 router module slot number. For
Figure
1-8.) The interface address is composed of a two-part number in the format
Table 1-4
for the interface address format.
Table 1-4 on page 1-11
for the interface address
Table 1-4 on page 1-11
for the interface address
Chapter 1
Overview
Figure
1-5.)
OL-3526-05
Advertisement
Table of Contents
