Default Font; Hexdump Mode; Code Page Subset; Vpa Check - Printronix P7000 User Manual

Code Page Subset

When the Thai code page is selected as the default, either from the front
panel or by a host command, you may choose from three different versions.

Default Font

Choose a font quality and size from the available selections. All fonts in the
Default Font menu are available in standard and compressed vertical
resolution (see page 208).

VPA Check

•
Enable (default). The printer checks for dots that fall outside the
intersection of the logical and physical pages. If dots fall outside the area,
the printer reports an error to the host if the IPDS Exception Handling
Control command setting requires error reporting.
•
Disable. The printer does not report dots outside the valid printable area.

Hexdump Mode

A hex code printout (or hex dump) translates all incoming data to hexadecimal
equivalents. A hex dump lists each ASCII data character received from the
host computer, together with its corresponding two-digit hexadecimal code.
Hex dumps can be used to troubleshoot some types of printer data reception
problems.

Print IPDS Fonts

This feature allows you to print a list of all resident fonts currently available in
the active IPDS emulation
211