Barcode Size; Early Print Comp (Complete); Graphics Scaling; Graphic Charsize - Printronix P7000 User Manual

Chapter 4
IPDS Emulation

Barcode Size

This parameter will emulate the barcode sizes of the selected printer model.
•
4234 (default). IBM 4234
•
67XX. Decision Data 67XX
•
64XX. IBM 6400 series
•
4224. IBM 4224

Early Print Comp (Complete)

This parameter chooses when to send a Print Comp to the controller.
•
Off (default). Print Comp is sent if page is printed completely.
•
On. Print Comp is sent immediately. The next page will be created. This
improves the print performance when starting the next page.
NOTE: When Early Print Comp is enabled and an error occurs, you may lose

Graphics Scaling

This parameter chooses the scaling factor for graphics when the Mapping
Control option of the IPDS Write Graphics Control command is SCALE TO
FIT:
•
Rounded (default). Calculations are rounded up in the desired output
resolution.
•
Exact. Graphics will be scaled as accurately as possible.

Graphic CharSize

This parameter will emulate the graphic character size of the selected printer
model.
•
4234 (default). IBM 4234
•
67XX. Decision Data 67XX

I2/5 Checksum

This parameter defines the printer checksum calculation method for
Interleaved 2 of 5 barcodes.
•
Standard (1/3) (default). The odd numbers will be multiplied by 3 and the
even numbers by 1 for calculation of the checksum.
•
Special (4/9). The odd numbers will be multiplied by 4 and the even
numbers by 9 for calculation of the checksum.
NOTE: "Odd" refers to the 1st, 3rd, 5th... character in the barcode, while
Default Code Pag
Choose which code page to use with the IPDS emulation. This option is
independent of the Character Set selection in the CTHI emulation.
210
data.
"even" refers to the 2nd, 4th, 6th... character in the barcode.