Labels; Printer Weight And Dimensions; Environmental Characteristics - Printronix P7000 User Manual

Appendix A

Labels

Labels
On Backing: One-part continuous perforated fanfold back form. Labels must be placed at
least 1/6 inch (0.42 cm) from the fan-fold perforation. Backing adhesive must not
be squeezed out during printing.
Sheet Size: 3 to 17 inches (7.62 to 43.18 cm) wide, including the two standard perforated
tractor feed strips. A maximum sheet length of 16 inches (40.64 cm) between
top and bottom perforations.
NOTE: A 16 inch rear door is needed for the cabinet model. Power Paper
Stacker option is 5 to 12 inches (12.7 to 30.48 cm) long.
Thickness: Not to exceed 0.025 inch (0.064 cm) (including backing sheet)

Printer Weight And Dimensions

Cabinet Type
Floor Cabinet
Pedestal
* With a power stacker, the weight increases by 21 lbs. and the depth
increases by 4.75 inches for a deeper rear door.
** With the ZTP option, the weight increases by 12 lbs. and the height is
increased by 7 inches.

Environmental Characteristics

Temperature:
Operating:
Storage:
Relative Humidity
Operating:
Storage:
290
Dimensions
Height Width
42.5 inches 27 inches
35 inches** 26 inches
50° to 104° F (10° to 40° C) up to 5000 feet
(1524 meters)
50° to 90° F (10° to 32° C) up to 8000 feet
(2438 meters)
-40° to 158° F (- 40° to 70° C)
15% to 80% (noncondensing)
15% to 90% (noncondensing)
Weight
Depth Unpacked
29 inches* 225 lbs.
21 inches 105 lbs.**
Packaged
285 lbs.*
115 lbs.**