Diagnostics - P7000Hd - Printronix P7000 User Manual

DIAGNOSTICS - P7000HD

DIAGNOSTICS
(from page 61)
Printer
Tests
Shift Recycle*
All E's
E's + TOF
All H's
All Underlines
All Black
Shuttle Slow
Shuttle Fast
Shuttle Only
Phase Printer
Paperout Adj.
Burnin Test
Print Error Log
Clear Error Log
1
Adapter Test
1
Ethernet Test
Acoustics
Dice Five
Printer Tests
These tests are used to check the print quality and operation of the printer.
NOTE: Your authorized service representative will typically run the tests.
•
•
•
•
•
•
•
Test Width Paper Out
Dots
Full Width* 76 dots*
80 col. (40-112)
They are described in more detail in the Maintenance Manual.
Shift Recycle. A sliding alphanumeric pattern which identifies missing or
malformed characters, improper vertical alignment, or vertical
compression.
All E's. A pattern of all uppercase E's which identifies missing characters,
misplaced dots, smeared characters, improper phasing problems, or light/
dark character variations.
E's + TOF. A pattern of all E's followed by a form feed to the next page
top-of-form, which identifies paper motion or feeding problems.
All H's. A pattern of all uppercase H's used to detect missing characters,
misplaced dots, smeared characters, or improper phasing.
All Underlines. An underline pattern useful for identifying hammer bank
misalignment.
All Black. A condition where all dot positions are printed, creating a solid
black band.
Shuttle Slow. Verifies proper operation by exercising shuttle and ribbon
motion at low speed.
* = Factory Default
1
If installed
System Print
Memory Statistics
32 Megabytes On: 127.7 Hrs.
Print: 8.3 Hrs
Print Strokes:
1370097
Print Lines:
106441
11 inch Pages:
4265
233