Spc Coax Params - Printronix P7000 User Manual

Format Control
Enables the printer to reflect the same spacing as CTPC model printers after
absolute and relative move commands are executed.
•
Disable (default). Reflects distance, generated by the VGL feature, PGL
feature, and Hex Transparent control code sequence, in the new position
(after horizontal and vertical tabs are executed).
•
Enable.
Max. Print Width
Set the maximum print width the printer will print when using a C/T host
interface. Set for 13.2 inches when printing files larger than the width of the
printer. All data exceeding the width of the maximum Printer Width will be
truncated.
•
13.2 Inches (default)
•
Printer Width (the maximum width of the printer)

SPC Coax Params

CTHI
(from page 107)
Simp Prot
1
Conv
SPC Coax
Params
Logical Buf Intervention
Req
Size
1920*
Send to Host*
960
Do Not Send
2560
3440
3564
PA1 PA2
Buffer Print
Translation
Tbl
Disable*
Enable
Buffer SPC
Reprint Null Supp
Enable*
Disable
SPC Coax Params
* = Factory Default
1
Option needs to be selected
Column 132 Usr Defined
Wrap HTRN
Disable* Start Code 1
Enable Start Code 2
Stop Code
SPC
NL At
Space Supp
MPP+1
Disable*
On*
Enable
Off
135