Rbn Low Action; Rbn Low Warn - Printronix P7000 User Manual

5. Press the same combination of keys a second time. If the new lock key
combination is entered again correctly, the display will read, "Lock key
has been changed." If it was entered incorrectly, the display will read
"Verification failed." Start over at step 2.
6. After entering the new lock combination successfully, press the ON LINE
key to put the printer back online.
NOTE: The new lock combination will remain even if the printer is powered
off and back on.

RBN Low Warn @

This option allows the user to select the Ribbon Life value at which point the
printer will declare a ribbon low condition and display the "RIBBON UNDER
XX% / Change RBN Soon" warning message. The default is Under 2%. See
"RBN Low Action" below for details of how the printer behaves once a ribbon
low condition is reached.
The values are Under 2% (default), Under 5%, Under 10%, Under 20%, and
Under 30%.

RBN Low Action

This menu determines how the printer behaves once a ribbon low condition is
reached.
•
Warn & Continue (default). Once a ribbon low condition is reached the
printer beeps and displays the "RIBBON UNDER XX% / Change RBN
Soon" warning message. Printing will continue without interruption. The
warning message can be cleared by pressing the ONLINE/Clear button,
however the message will persist again in two minutes. This action will
continue until a ribbon out (ribbon life reaches 0%) condition occurs.
•
Warn & Pause. This setting is similar to the Warn & Continue selection
with one exception. When a ribbon low condition is reached the printer will
still display the "RIBBON UNDER XX%/Change RBN Soon" warning
message, however the printer will stop printing. This is meant to get the
user's attention. To resume printing the user must press the ONLINE/
Clear key.
NOTE: Printing will only stop on the first occurrence of a ribbon low condition.
Once the user clears the warning message, subsequent warnings will
display the warning message but printing will continue.
231