Normal Mode; Battery Mode - Eaton Powerware 5125 User Manual

Normal Mode

During Normal mode, the
displays the percentage of UPS load capacity being used by the
protected equipment (see Figure 22). The UPS monitors and charges the
batteries as needed and provides power protection to your equipment.
When all of the load level indicators and the
power requirements exceed UPS capacity; see page 62 for more
information.

Battery Mode

When the UPS is operating during a power outage, the alarm beeps
once every five seconds, the
μ
indicator flashes.
When utility power returns, the UPS transfers to Normal mode operation
while the battery recharges.
If battery capacity becomes low while in Battery mode, the
starts flashing and the alarm becomes continuous. Immediately
complete and save your work to prevent data loss and similar difficulties.
When utility power is restored after the UPS shuts down, the UPS
automatically restarts. The
recharged to an acceptable level.
®
EATON Powerware 5125 Two-in-One UPS (2400/3000 VA) User's Guide
μ
indicator illuminates and the front panel
>100%
76–100%
51–75%
26–50%
0–25%
Figure 22. Load Level Indicators
indicator are illuminated,
+ ---
indicator illuminates, and the
indicator flashes until the battery has
S
164201383 Rev C www.power-
OPERATION
+ ---
indicator
35
ware.com