Ups Rear Panels - Eaton Powerware 5125 User Manual

4.
5.
6.
7.
8.
9.

UPS Rear Panels

This section shows the rear panels of the Powerware 5125 models.
Communication Port
X-Slot Communication
Bay
REPO Port
Battery Connector
Communication Port
X-Slot Communication
Bay
REPO Port
Battery Connector
®
EATON Powerware 5125 Two-in-One UPS (2400/3000 VA) User's Guide
Reconnect the REPO connector to the REPO port.
Verify that the externally-connected REPO switch is not activated to
enable power to the UPS output receptacles.
Plug the UPS power cord into a power outlet.
Press and hold the On button until you hear the UPS beep
(approximately one second).
Activate the external REPO switch to test the REPO function.
De-activate the external REPO switch and restart the UPS.
5-15 Receptacles
Ground Bonding
Screw
Figure 17. 2400/3000 VA, 100/120V Rear Panel
IEC 320-C13 Receptacles
Ground Bonding
Screw
Figure 18. 2400/3000 VA, 230V Rear Panel
Circuit Breakers
Power Cord with L5-30P
Circuit Breakers
Power Cord with 16A, IEC-309 Plug
S
164201383 Rev C www.power-
ware.com
INSTALLATION
L5-30 Receptacle
IEC 320-C19
Receptacle
31