Eaton Powerware 5125 User Manual page 45

Table 1. Configuration Mode LEDs and Options
Configuration Mode
Option
LEDs
100/200–208V
Nominal Input
Voltage
110/220V
Nominal Input
Voltage g
120/230V
Nominal Input
Voltage
127/240V
Nominal Input
Voltage
Site Wiring
Fault Alarm
®
EATON Powerware 5125 Two-in-One UPS (2400/3000 VA) User's Guide
LED Status Explanation
On* Selecting this option changes the nominal input voltage on
low voltage models to 100V and to 200-208V for high voltage
models.
* Default for PW5125 3000j RM models.
Flashing 100/200–208V is disabled; one of the other input voltage
options is selected.
On Selecting this option changes the nominal input voltage on
low voltage models to 110V and to 220V for high voltage
models.
Flashing 110/220V is disabled; one of the other input voltage options is
selected.
On* Selecting this option changes the nominal input voltage on
low voltage models to 120V and to 230V for high voltage
models.
* Default for PW5125 2400 RM, PW5125 3000 RM,
PW5125 2400i RM, PW5125 3000i RM, and PW5125 3000e RM
models.
Flashing 120/230V is disabled; one of the other input voltage options is
selected.
On* Selecting this option changes the nominal input voltage on
low voltage models to 127V and 240V for high voltage models.
* Default for PW5125 3000g RM models.
Flashing 127/240V is disabled; one of the other input voltage options is
selected.
On Alarm sounds when the polarity of the outlet is reversed or
the ground connection is missing; have a qualified electrician
repair the outlet wiring.
Flashing* Alarm DOES NOT sound when the polarity of the outlet is
reversed or the ground connection is missing.
* For 100, 200, or 208V models, Site Wiring Fault is not
available (flashing is the only status).
CONFIGURATION
S
164201383 Rev C www.power-
ware.com
39