Page 1
Powerware 5115 (9910-P13 and P14) ® Communication Options ® for IBM Applications...
Page 2
International Business Machines Corp. Powerware is a registered trademark and ConnectUPS is a trademark of Eaton Power Quality Corporation. ECopyright 2005 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be reproduced in any way without the express written approval of Eaton Corporation.
Page 3
Follow the installation instructions with the Software Suite CD. This document shows the communication option overviews. For additional information and a current listing of supported operating systems, go to www.powerware.com. ® ® EATON Powerware 5115 (9910-P13 and P14) Communication Options for IBM Applications 164201599 Rev A...
Page 4
UPS Interface Cable (labeled 1827) End of Cable Labeled “AS/400” AS/400 Interface Cable (labeled 05146792) End of Cable Labeled “UPS” Communication Port Figure 1. i5 Interface ® ® EATON Powerware 5115 (9910-P13 and P14) Communication Options for IBM Applications 164201599 Rev A...
Page 5
Connect the cable as shown in Figure 2. “J14” UPS Port IBM iSeries Server (location may vary by model) AS/400 Interface Cable (labeled 05146792) Figure 2. iSeries or AS/400 Interface ® ® EATON Powerware 5115 (9910-P13 and P14) Communication Options for IBM Applications 164201599 Rev A...
Page 6
Do not set QUPSDLYTIM to “*NOMAX” unless you understand the implications of the “*NOMAX” function as described at the AS/400 Information Center Internet Site. ® ® EATON Powerware 5115 (9910-P13 and P14) Communication Options for IBM Applications 164201599 Rev A...
Page 7
The UPS does not support LPARs. LPARs are supported on UPS models 9910-P22, P23, P30, P33, P64, and P65 with the ConnectUPS -X Web/SNMP Card (FC 2934). ® ® EATON Powerware 5115 (9910-P13 and P14) Communication Options for IBM Applications 164201599 Rev A...
Need help?
Do you have a question about the Powerware 5115 and is the answer not in the manual?
Questions and answers