UPS Setup
The Powerware 5125 UPS is designed for flexible configurations and can
be installed in a rack or as a standalone cabinet.
If you are installing the UPS in a rack, continue to the following section,
"Rack-Mount Setup;" otherwise, continue to "Tower Setup" on
page 22.
Rack-Mount Setup
The UPS can be installed in 19-inch racks and needs only 2U of valuable
rack space.
The UPS and EBM are heavy (see page 55). A minimum of two people are required to lift the
cabinets into the rack.
NOTE Fixed mounting rails are required for each UPS and EBM cabinet. If fixed rails are
not already installed in your rack, contact your local distributor to order rail kits.
To install the UPS and optional EBMs in a rack:
1.
2.
3.
®
EATON Powerware
5125 Two-in-One UPS (2400/3000 VA) User's Guide
Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
Attach the supplied mounting handles to the mounting brackets and
secure with the supplied screws (see Figure 5).
If installing optional EBMs, repeat Steps 1 and 2 for each cabinet.
Mounting Handle
Figure 5. Installing the Mounting Handles
C A U T I O N
S
164201383 Rev C www.power-
ware.com
INSTALLATION
Mounting
Bracket
21