Chapter 9
Audible Alarms and UPS Conditions
On Battery
General Alarm
®
EATON Powerware
Troubleshooting
This section explains:
S
UPS alarms and conditions
S
How to silence an alarm
S
Service and support
The UPS has an audible alarm feature to alert you of potential power
problems. Use Table 9 to determine and resolve the UPS alarms and
conditions.
Battery Service
Figure 36. Alarm Indicators
Silencing an Audible Alarm
Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 9).
To silence the alarm for an existing fault, press the
status changes, the alarm beeps, overriding the previous alarm silencing.
The alarm does not silence if there is a low battery condition.
5125 Two-in-One UPS (2400/3000 VA) User's Guide
Site Wiring Fault
Power On
Load Level Indicators
S
164201383 Rev C www.power-
Indicator Legend
Unlit
Green
Red
Flashing
On Button
Off Button
Alarm Reset Button
button. If UPS
59
ware.com