2.
Unscrew three nuts (one in the upper left corner and two on the
bottom of the bracket) and set aside the battery retaining bracket
(see Figure 33).
3.
Pull the battery out onto a flat, stable surface (see Figure 34). See
"Recycling the Used Battery or UPS" on page 53 for proper
disposal.
4.
Slide the new battery into the UPS.
5.
Reinstall the battery retaining bracket and nuts removed in Step 2.
6.
Replace the UPS front cover.
®
EATON Powerware
5125 Two-in-One UPS (2400/3000 VA) User's Guide
Figure 33. Removing the Battery Retaining Bracket
Figure 34. Removing the Battery
S
164201383 Rev C www.power-
UPS MAINTENANCE
51
ware.com