Introduction - Eaton Powerware 5125 User Manual

Chapter 1
®
EATON Powerware

Introduction

The Powerware 5125 uninterruptible power system (UPS) protects
®
your sensitive electronic equipment from basic power problems such as
power failures, power sags, power surges, brownouts, and line noise.
Power outages can occur when you least expect it and power
quality can be erratic. These power problems have the potential to
corrupt critical data, destroy unsaved work sessions, and damage
hardware — causing hours of lost productivity and expensive repairs.
With the Powerware 5125, you can safely eliminate the effects of power
disturbances and guard the integrity of your equipment. The Powerware
5125 is designed for critical applications such as PCs, servers,
workstations, and telecommunications equipment. Figure 1 shows the
Powerware 5125 UPS with an optional Extended Battery Module (EBM).
Figure 1. The Powerware 5125 UPS with Optional EBM
Providing outstanding performance and reliability, the Powerware 5125's
unique benefits include the following:
S
2U rack height that conserves valuable rack space.
S
Two-in-one form factor for using the UPS in a rack-mount
configuration or as a standalone cabinet.
S
ABM technology that uses advanced battery management to
®
increase battery service life, optimize recharge time, and provide a
warning before the end of useful battery life.
S
Hours of extended runtime with up to four EBMs.
S
Start-on-battery capability for powering up the UPS even if utility
power is not available.
5125 Two-in-One UPS (2400/3000 VA) User's Guide
S
164201383 Rev C www.power-
ware.com
1