The setup varies depending on the number of cabinets you are installing:
1.
For one cabinet, the pedestals must be installed. Continue to Step 2.
For two cabinets, the pedestals and the joining brackets must be
installed. Skip to Step 6.
For three or more cabinets, the joining brackets must be installed. Skip
to Step 10.
2.
Place the UPS horizontally so that the left end of the cabinet is
accessible (see Figure 8).
3.
Align the pedestals with the screw holes on the end of the UPS
cabinet. Secure the pedestals with the screws provided in the
accessory kit.
4.
Carefully position the cabinet upright with the air vents at the top
(see Figure 9).
5.
Continue to "Installing the UPS" on page 27.
®
EATON Powerware
5125 Two-in-One UPS (2400/3000 VA) User's Guide
Figure 8. Installing UPS Pedestals (for One Cabinet)
Figure 9. Pedestals with One Cabinet
S
164201383 Rev C www.power-
INSTALLATION
Air Vents
23
ware.com