®
xStack
The fields that can be configured are described below:
Parameter
From Port / To Port
State
Mode
Click the Apply button to accept the changes made.
Voice VLAN OUI Settings
This page is used to configure the user-defined voice traffic's OUI. The OUI is used to identify the voice traffic. There
are a number of pre-defined OUIs. The user can further define the user-defined OUIs if needed. The user-defined OUI
cannot be the same as the pre-defined OUI.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN OUI Settings, as shown
below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-19 Voice VLAN Port Settings window
Description
Here the user can select a range of port to display.
Here the user can configure the state of the port.
Here the user can configure the mode of the port.
88